For communication to succeed on the AM-5 and the Sunsynk/ Deye 12kw 3 Phase
Please use Pin 2-6 4-4 5-5 for the Communications Cable
Essentially on Hubble Battery side you will have PIn 2,4,5 wired in
on the Inverter side you will have Pin 6,4,5
The CAN cable must go from the AM5’s “CAN” port to the Sunsynk 5’s “BMS CAN” port.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article