PLEASE NOTE
Axpert type inverters require a Cloudlink to access full CAN-BUS communication with a Hubble Energy battery, it is however not required, and the system will be functional on user defined voltage control.
CLOUDLINK
The Cloudlink will connect to an Axpert type Inverter via:
Cloudlink’s (Serial/RJ12 Port) to the Axpert type Inverter (RS232 Port)
(Black Cable) - RJ12 to RJ45 (450mm) cable.
The Cloudlink will connect to the Battery via:
Cloudlink’s (CAN Port) to the Battery (CAN Port)
(Blue Cable) - Standard RJ45 to RJ45 (1500mm) cable.
RJ45 PIN LAYOUTS
Ensure that the clip is pointed away from you when counting the pins.
Pin | X-101/AM-4/AM-2 | AM-5/AM-10 |
1 | - | - |
2 | GROUND | - |
3 | - | - |
4 | CANH | CANH |
5 | CANL | CANL |
6 |
| - |
7 | - | - |
8 | - | - |
2, 4 & 5 Pin Layout image reference seen below: (Blue Cable)
4 & 5 Pin Layout image reference seen below: (Blue Cable - Modified)
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article