Hubble Energy recommends the Cloudlink Device on Goodwe installations. It is not required but recommended.
CLOUDLINK
The Cloudlink will connect to the Battery via:
Cloudlink’s (Serial/RJ12 Port) to the Battery (RS232/RJ12 Port)
(Black Cable) – RJ12 to RJ12 (450mm) cable.
RJ45 PIN LAYOUTS
The Goodwe Inverter will connect to the Battery via:
Inverter (CAN Port) to Battery (CAN Port)
Straight RJ45 to RJ45 wire - 1500mm.
Ensure that the clip is pointed away from you when counting the pins.
Pin | Inverter | X-101/AM-4/AM-2 | AM-5/AM-10 | Blade |
1 | - | - | - | - |
2 | - | GROUND | - | - |
3 | - | - | - | - |
4 | CANH | CANH | CANH | CANH |
5 | CANL | CANL | CANL | CANL |
6 | - | - | - | - |
7 | - | - | - | - |
8 | - | - | - | - |
4 & 5 Pin Layout image reference seen below:
2, 4 & 5 Pin Layout image reference seen below:
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article